Double-sided mounting tape - new building material. But it is very clear. This adhesive (rubber-based or acrylic), but not in the liquid state and deposited on a polyethylene foam tape from both sides. The benefits of such a solution is obvious. For example, the use of tape when installing plastic wall panel strikes from the list of installation work such as the drilling operation and the use of fasteners, clean the surface of adhesive residues ... Save time and money - on the face.
|
When it comes to mechanical stress (for example, mount anything to the wall panel), they are not concentrated at the point of fixture, and are evenly distributed across the glued surface. Nevertheless, there are limits - depending on the brand of tape used these efforts should not exceed 15 to 30 kg per 25 mm glued surface.
Features Application: The surface must always be clean, dry and solid. It is necessary to ensure a tight clamp band (from this point of view, the most optimal smooth and flat base on uneven surfaces the tape can not hold the " load " ).
When bonding large area rigid and relatively uneven parts need a certain thickness tape Foam. Such a tape to compensate for uneven surfaces and provides a large area of contact adhesive.
When choosing the mounting tape is attentive to its brand by referring to the area of its application. It is necessary to pay attention to the type of its adhesive (acrylic or rubber). What is more appropriate - you choose.
The properties of the rubber adhesive layer: high initial adhesion (adhesion); slight subsequent increase in adhesion; high shear strength; moderate heat resistance; good resistance to solvents; moderate resistance from UV rays; relative longevity.
The properties of the acrylic adhesive layer: sufficient initial adhesion (adhesion); a gradual increase in adhesion; high shear stability; high heat resistance; high resistance to solvents; Increased resistance to UV rays; durability.