Home ยป Building materials

Papered walls wallpaper

Pasting wall wallpaper - for the layman rather difficult task, requiring patience and meticulous. Therefore, before proceeding with the case, carefully thought-out plan, prepare all the necessary tools and materials.
You will need:
  • Sweeping brush with a long handle,
  • brush for applying the adhesive,
  • brush or rag to smooth the wallpaper,
  • scissors,
  • roller to smooth and snug edges of wallpaper,
  • knife,
  • plumb line and level,
  • Roulette,
  • container of glue,
  • adhesive wallpaper,
  • sponge to remove excess glue,
  • ladder.
Today we introduce you to some of the rules of papering the walls of wallpaper, which will help you to make your own wall smooth, beautiful and smooth.
 
First, remove all unnecessary nails and spikes, holes seal the plaster solution. By pasting wallpaper imported dry rooms make good use of cellulose reinforced gypsum filler that gives a smooth surface, good filling cracks and holes. In wet areas to avoid the subsequent peeling from the walls, use only water-resistant putty, belonging to the category of front.
Before pasting the walls should be primed with deep penetration or diluted glue that reinforces the surface. This is especially important if you're going to paste wallpaper, under the category “ & rdquo ;. heavy After drying, cover the walls with newspapers or paper. If the walls are already pokleit wallpaper, tear them. Old wallpaper removed in a dry state, without water, and special chemical solvent. On the walls, covered with plywood and drywall, all joints seal the newsprint in 2-3 layers.
 
Before gluing it is necessary to check all rolls: whether their number is required if there are any among them with different design patterns, whether they are one and the same reference to color and number matching. If embedded special instruction, then follow it.
 
Before you cut the wallpaper, it is necessary to pay attention to the marking characters that appear on the liner, and it is in rapport. May encounter an option that is not adhered to customize design (no wallpaper pattern and glued without fitting). When drawing the line, fit a drawing is not required, without significant glued wallpaper to match the shift pattern. MOVE fitting means fitting in drawing, ie subsequent panel is glued to the vertical offset from the previous one. Counter sticker - inverted gluing, ie each subsequent webs glued in the opposite direction with respect to the previous one. Sometimes displacement ratio indicated in the drawing figures, such as 56/26.5 (in this case the rapport and offset are adjusted in inches in accordance with said figures). Thus, the length of the panels have a wallpaper with a large figure should equal the height of the wall plus rapport.
 
 
 
Panels are cut with scissors or a special knife for cutting the wallpaper. The first panel is cut so that after gluing small strips of land went to the ceiling. Before the next cut, paste neohodimo first segment so that you could see how much should be left to the flag all subsequent match.
 

How glue wallpaper glue

For gluing the type of glue used, which is recommended by the manufacturer of this type of wallpaper, for example, it is recommended to use vinyl wallpaper adhesives containing fundigid.
Generally kind of glue depends primarily on the weight and density of wallpaper. Normally the heavier wallpaper, the thicker should be the glue, and the more time they need to soak.
For simple water-resistant wallpaper paste is best to use “ Synthetic ” or “ & rdquo ;. Bustilat The best glue for wallpaper simple – “ CMC & rdquo ;. Washable wallpaper paste, using compositions based on PVA. In the high-quality, embossed, corrugated, embossed, “ a & rdquo ;, silk wallpaper usually indicates the recommended type of glue. For simple wallpaper adhesive is used from corn or maize starch, with dilution water.
For special wallpaper and special surfaces apply a special wallpaper paste, which contains a synthetic resin powder, which increases its adhesive power, and prevents mold. Best glues dispersion adhesive, which is used for working with thick fabric and metallic wallpaper, and is also used as an additive to other types of wallpaper paste.
 
Cut the cloth laid out on the working voverhnosti (table or floor), front side down and brush the glue evenly applied to the wallpaper from middle to the edges. It is necessary to completely cover the surface of the cloth. Then, in order to better absorb the adhesive, the wallpaper is composed as follows: from the bottom - in the middle, inside surfaces missed or concertina type. Thereafter wallpaper retained in such a way to soften a few minutes. All cloth should be impregnated with the same amount of time.
 
Wallpaper glue together is more convenient, especially if they are with a pattern that needs to be customized. They can be glued only with dry wall. Thin wallpaper plaster once, and the adhesive can be cold, dense – Double warm adhesive. Since only a few walls, windows and doors do have a direct and correct form, it is always necessary to do the vertical lines using a plumb line. Pasting lead with closed windows and doors. Begin from the window, so the wall right of the left edge of the cut to the left of the window – right.
 
After impregnation, the first panel is applied against the wall, according to vertical markup firmly pressed and smoothed first in the upper part by means of a soft brush in the direction from the center to the corners to avoid bubbles, wrinkles and folds (if wallpaper smooth - it is possible to use a rubber roller for smoothing welds if a high wallpaper embossed or raised, you can only use a brush, with light pat kotoorye joined seams). Then, in the same way razglazhivaetya lower part of the flag. After gluing the cloth protruding top and bottom edges of the wallpaper are cut with a knife. As a ruler, you can use a straight staple.
 
 
 
When gluing folds are formed, then there was a wallpapered airlock. In this case, carefully peel cloth, apply glue to it again. If and then the bubbles do not disappear, this indicates that insufficient soaked wallpaper glue. Small wrinkles disappear after drying. The bubbles can be punctured by a needle or cut the blade.
Ventilate the room only after the complete drying of wallpaper, or wallpaper will disappear. Good luck!  
 
 
full version