Home ยป Heating

Wall gas boilers

Individual heating has long been a common practice in Europe. Such popularity of individual heating systems is well founded.   The main reason is that this method of space heating for at least two times more efficient than the collective system utilities. Wall-mounted gas boilers allow consumers themselves to regulate the temperature in the apartments, turn off the heat for prolonged departure or summer. This reduces gas consumption and save money.
  Now individual heating is actively developing. It is no secret that in our country central heating in some areas operates intermittently. The introduction of individual heaters helps to solve this problem. This practice already exists and is constantly expanding. Here are some examples.
About his participation in the introduction of highly economical innovations declared 27 districts. According to experts, the introduction of individual heating circuit can also make a much cheaper housing, eliminating the need for expensive heating systems and thermal areas, as well as helping to reduce tariffs.
The effect of the introduction of   above systems depends on the quality of the boiler equipment. The most technologically advanced and reliable wall gas boilers developed by the German company VIESSMANN . Of particular note is the new series (thermal Vitopend, Vitodens).
 
gas fired boiler VITOPEND 100 with modulating atmospheric burner.
The best solution for small spaces. Gas combi boiler, built in cupboards and niches with the selection of the combustion air from the installation room or outside. The greatest convenience Vitopend 100 is shown in use: it is easy to maintain thanks to the built-in plate heat exchanger made of stainless steel ensures rapid hot water at a uniform temperature.
 
Time-saving installation and maintenance
Installation of new wall thermoblocks Vitopend and Vitodens now takes even less time, and commissioning even easier. All components of the fuser easily accessible from the front surface, and thanks to the automatic control of the combustion process commissioning will take place in the blink of an eye.
As the new cap the Vitotronic leans toward you, it lets you do quite spacious easily accessible communication space.
 
 
 
Insert coding card - and you're done!
The coding plug is used to independently recognize the type Vitotronic wall fuser and adapt to it. Eliminates the need for manual data entry, time-consuming, which eliminates errors. Integrated into the processor function Plug & amp; Work identifies and adapts all connected sensors and system prinadlezhnosti.Tem thus significantly reduces the time for commissioning.
 
All the gas wall fuser consistently implemented modular principle, there is a high degree of unification of design, size and details and easy access to all important elements. Same for all thermal blocks with quick-union Multi-Stecksystem and water boards Aqua-Platine - is the basis for simple and does not require time-consuming installation.
All hydraulic connection arranged from the rear wall so all components are easily accessible and can be pulled toward you. Therefore, the installation does not need to leave the side of the space service.
Despite its compact design, wall thermoblocks from the new program Viessmann show greater rigor accessibility for maintenance and inspection. For example, thanks to the fold-controller.
Optolink laptop interface allows a simple click on the button to make the parameterization and using a laptop request technical data of the fuser.
Viessmann offers a common set of adapters for quick change of obsolete units, regardless of the brand of the product. Thus, the change takes place without any problems and the high cost of installation.
Vitotronic control units are well-known and well-proven for outdoor boilers. There are different control options for every need:
- Vitotronic 100 control mode Room temperature
-Vitotronic 200 for weather-compensated with connectivity mixer circuit
- Vitotrol 100 clock thermostat Vitotrol 200/300 remote control
 
Remote Control
The new program wall of thermal blocks for integration in the internal and external communications. This is an attractive price in relation to remote monitoring of wall modules in single-family or two-family houses on the phone via Vitocom 100, and accession to the LON system or the EIB, as well as remote control and monitoring through a system of Internet Telecontrol Vitodata 300.
                      Communications software for connection of heating systems to a laptop computer Vitosoft 200 facilitates commissioning, service and maintenance in the field. With automatic entry features and data that are unique to this setting, formed the protocol setting.
A attractive in terms of price control system for remote wall of thermal blocks in single-family and semi-detached homes, as well as in buildings with irregular residence Vitocom 100. By Vitocom 100 control can be carried out over the phone.
Vitodata 300 - a system that allows remote management and control heating system round the clock. Access occurs through the Internet in conjunction with Vitocom 100 or 300 using well-known software shells. All system malfunctions Vitodata immediately reports by mobile phone (Online SMS) or by fax. In this case, there is no need for constant Internet connection.
Use the temperature control system in a single room 200 Vitohome can heat each room individually and thereby save energy. Vitohome core 200 is the central control unit. It controls the temperature data and the inputted through radio control valve battery on radiators or in the underfloor heating. The wireless connection is managed as Vitotronic boiler water temperature. This helps to save heating energy.
  Additional installation made especially easy thanks to the communication system
using radio signals.
Thanks to all standard LON bus Gas wall thermoblocks are incorporated into the interior of the building control technology "smart home".
 
Design: compactness, elegance and high quality
Design wall thermoblocks is an indicator of technical, form and function, reflecting characteristics such technology Viessmann quality, durability and comfort. Unique design that reflects the very essence, is great for integration into any room and environment.
The new wall thermoblocks are the products of the program Vitotec, which has already received 38 design awards. The recent award of a wall fuser awards «reddotaward 2004" clearly confirms the exceptional design of the product.
The size of gas wall thermoblocks Viessmann also agreed with the standard technique for embedding dimensions are taken into account by manufacturers of kitchen and casual furniture.
For the new design Viessmann has developed a special color: vitobely, ideal for kitchen and bathroom. To do this, muted white basic home appliances and furniture were added shiny metallic inclusions, which along with the low-key definition gives the product an unprecedented depth.
Thoroughly reduced noise flow not only during starting, but also a
during operation. In combination with a new attractive design becomes the ideal technique for the living area.
 
High efficiency for a long time
In the power of the boiler is influenced by many factors: the length of the flue gas or air pressure fluctuations due to changes in weather conditions. Developed by Viessmann system of automatic control of the combustion process compensates for these factors, so that standard efficiency Vitopend remains high for a long time - regardless of external influences.
The combustion process is automatically controlled in all modes, thus eliminating the need for manual adjustment or the use of diaphragms.
 
VITODENS 200
fired boilers Vitodens 200 combines high quality at a reasonable price. With a capacity of 8.8 to 26 kW it reaches a standard efficiency up to 107%. Versatility Vitodens 200 allows the   use it for heating and domestic hot water with both the selection of the combustion air from the installation room and outside. Thanks to its compact size and design, have no control over which the whims of fashion, it is ideal for installation in a residential area.
The compact condensing surface Inox-Radial stainless steel is most effective to use thanks to the laminar heat transfer principle. The radial design allows you to place large heat exchange surfaces in the smallest space. The rectangular shape of the coil with a predetermined gap arises a laminar flow with the most intense heat transfer. To this we should also add that the smooth stainless steel surface and vertical flow over contribute to the intensification of the process of self-purification.
The innovation in all wall fuser Vitodens: removing the air comes from the return line. To this end wall thermoblocks Viessmann designed so that exhaust air has a large water space. The result: reduced installation time, easy commissioning, long-term operational reliability and reduced flow noise during the operation.
Modulating cylinder burner Stainless steel premix area modulation 1: 3 allows the most economical use of energy. This burner also reduces the emission of harmful substances, the level of which, so far below the environmental standard "The Blue Angel».
 
 
VITODENS 300
The combination of high-end technology: modulated infrared burner MatriX-compact with a catalytic coating and well-proven heat transfer surfaces of the Inox-Radial stainless steel, ensures standard efficiency to 109% - this reduces heating costs and allows the care of the environment.
As with all condensing wall fuser Viessmann, in the Vitodens 300 are heat transfer surfaces of the Inox-Radial stainless steel. This ensures that the benefits of the principle of heat transfer, design and intensification of the process of self-purification.
Thanks modulation 1: 4 radiant burner MatriX-compact with a catalytic coating allows the most economical use of energy and reduce the emission of harmful substances, the level of which, so far below the environmental standard "The Blue Angel».
Vitodens 300 is equipped with automatic control of the combustion process. It allows you to smoothly adapt to changing operating conditions, such as weather changes. This ensures a long-term optimal combustion mode.
radiant burner MatriX-compact low noise level during combustion and the modulating power ensures ease of use.
The combined version of Vitodens 300 is equipped with a plate heat exchanger. He immediately applied to the output hot water temperature constant. Large capacity and a wide range of applications: wall thermoblocks Vitodens 300 to 66 kW have the same advantages, which are characteristic for the "small" thermal blocks Vitodens 300. This is the best solution to save space and energy for apartment buildings, industrial buildings and public institutions.
 
Heat power big, small footprint
Highly Viessmann wall thermoblocks with its regulatory efficiency up to 109% can significantly reduce energy costs. Power separate fuser can reach up to 66 kW. This is the technical core of the spiral heat exchanger with condensation surface Inox-Radial stainless steel. Heating water flows, in this case two coaxial, disposed parallel heat exchangers. This allows you to place large heat exchange surfaces in the smallest space. Focus on two parallel spirals reduces noise flow and reduces energy consumption for the circulation pump.
Up to four Vitodens 300 with the cascade controller and a special drainage system flue gas can cover the heat consumption for heating 264 kW. Unlike other systems cascade system flue Viessmann works by overpressure; while it allows, even at 264 kW sustain optimal for mounting all pipe diameter of 100 mm. Rollover protection device is triggered automatically traction and is therefore the most reliable - no additional electrical equipment and sensors.
Use the cascade controller for the Vitodens 300 can be obtained as summarized nominal heat output of all connected wall of thermal blocks, and only the power of a single wall fuser. Thus, the area modulation whole installation significantly expands and reaches from 12.2 to 264 kW. (see. diagram)
 
VITODENS 333
Compact fuser Vitodens 333 combines the benefits of the Vitodens 300 condensing and high-performance 86-liter storage of drinking water. Innovative heating technology - heat exchanger with condensation surface Inox-Radial and radiant burner MatriX-compact with a catalytic coating in a modular design - ensures vysokokomfortnoe water heating and water heating, which usually can be achieved only DHW cylinder twice the size.
The dimensions of Vitodens 333 correspond to the standard size kitchen and usual furniture and allow the fuser to integrate optimally in the living area. With a height not exceeding 140 cm, Vitodens 333 is ideal for installation in the roof slope or in niches.
All connections are easily accessible for electrical, hydraulic components are pre-assembled into a single unit. Thus, Vitodens 333 allows to make installation in the shortest time. New Vitotronic control unit is transferred to the upper part of the module, which not only facilitates operation, but it also means an advantage for maintenance and service.
full version