Home » Machinery and equipment

Stackers from Italy and Germany

Stackers from Italy and Germany Italian companies produce a very wide range of warehouse equipment and stackers in general, in particular. Today in our market you can find brands such slave propelled stackers as Lifter, Armanni, CML, OMG, ICEM, Incab. The most famous, perhaps, the first three. More recently, in the domestic market were stackers mark OM Pimespo, which produces another Italian company – Singlemode Carrelli, included, by the way, in the German company Linde AG.

Stacker Lifter Pramac Lifter Italian manufacturer presented two series – LX and GX. The GX complement the built-in charger and car batteries (battery) with a capacity of 70 ... 130 A? H, which can significantly reduce their cost in comparison with models of traction batteries. On stackers LX Series set the traction battery capacity of 180 ... 315 A? H; in addition they can be equipped with a platform for the operator. Standard lift height of nearly all models – not more than 3.5 m, but there is a version with a mast-type « »: Triplex Maximum lift height (in. n.) had 4.5 m (for example, model LX 14/45 c Residual capacity at maximum height 800 kg) . The model number of stackers Lifter there are models with sliding GX straddle forks to work with non-standard pallets. All stackers are fitted with built-in charger. The equipment of this brand sells a lot of companies not only in Moscow but in other Russian cities. Suffice it to mention firms like « EvroSklad », « Pallet Trucks », « Viksenta » and others.

Guided stacker Armanni last series Silverline (probably the name is due to silver color art), which produces Italian company Armanni Carrelli Elevatori, in our market are present in the following main versions: capacity (g/n) of 1.0 m – Speedy light (c. F. 1.6 m) and Master light (c. F. 2.9 m) and more powerful – Series Delta SL/SLE (in. p. 1.6 ... 3.5 m) and Triplex SL (in. p. 3.0 ... 4.5 m) g/n 1.2 and 1.5 m, respectively. The company also manufactures and less well-known in our Delta Series SLTR and 4 VIE SL (basic parameters are the same as at the Delta SL, but the first is a function of the hydraulic initial lifting forks to overcome slopes and carry two pallets and the second – advanced support brackets and four swivel casters). MAX SL models with a lifting height of 1.6 ... 3.5 m have a high load capacity – 13; 1.6 and 2.0 m. All models except Speedy light and Master light, equipped with a microprocessor with impulse control MOSFET, system troubleshooting and double front rollers. Free lift their 200 mm. stacker Armanni implement many famous Moscow companies, especially such large as the « Stella Technician » and « Tommy service ».

A wider range of models – in a series of self-propelled stackers brand CML eponymous Italian company. Model g/n 1.0 tons produced in two series: Poker (with a battery capacity of 120 A/h,. P. & Ndash; up to 2.72 m) and STE/R (capacity of the battery 100 A/h,. n. – up to 3.2 m). In addition to these models in the series STE includes stackers g/n 1.2 m; 15; 1.6 and 2.0 tonnes and lift height of 1.6 to 4.5 m (battery capacity 225 ... 340 A? H).

Stackers from Italy and Germany

The Italian company OMG Carrelli Elevatori Elettronici is not very well known here, but occupies a prominent place in the design of industrial trucks and one of the largest European manufacturers over 200 different models of warehouse lifting equipment powered by batteries. In addition, the company manufactures loading equipment according to customer requirements, which does no other Italian manufacturer. Lineup only driven stackers this company is very large. This is primarily classical stackers 710, 712, 715 and 720 (series A) carrying capacity of 1.0 ... 2.0 m (corresponding to the last two digits), the lift amount depending on the type of masts can reach 4.65 m. In a series of there are options with sliding forks. Specially designed for narrow aisles more maneuverable and compact design Logos g/n 1.2 m (minimum aisle width 2.28 m). For warehouses to conditions causing increased corrosion of the metal pattern is 712KEA g/s 1.2 m from the housing, the chassis and the pillar of stainless steel. Stackers Series BLK characterized by high stability, as provided with support brackets, VMC series models have a function of the initial fork lift, and can be used to work with two trays. Led model FS series are equipped with a counterweight, they do not have the support of consoles and structurally, they are similar to those previously described Korean stacker-steer loader Soosung. Great demand model Stacker 813th series, as performed with the cabin for the operator, which greatly simplifies the work in heavy turnover. Cargo handling such machines available to a height of 5.4 m. The wide range offered by the company OMG stacker with a variety of features allows you to choose the desired option for handling pallets and standard and non-standard. This technique offers many domestic companies and major retailers in Russia it is the company « Technique for warehouse », « EvroSklad » and others.

very similar and the same big production program stacker produces firm ICEM. The lineup of the company are: Series TE – compact palletizers g/n 1.0 ... 2.2 m, height – 6 m; TEC Series with footrest for the operator and fencing, g/n 1.3 ... 2.0 m in. n. – to 6.0 m; Series TE-DS c function of the initial rise; Series TE-Z/TEX in corrosion-resistant design (basic elements of load-bearing structures – zinc-coated or stainless steel); TE-FL series with extended support brackets and sliding fork for transportation of non-standard pallets; TE-4D Series g/s to 2.0 m and heights up to 4 m 66 all co castors (can be moved in four directions). The company also produces three models of stacker-mini-trucks with counterweight (without support arms): CTS 6, CTS 12, CTS 15 g/n 0.6; 1.2 and 1.5 tons, respectively, and lift heights up to 4.66 m. On the Russian market, this technique, as well as warehouse equipment OM Pimespo implements AB « RusTrans ».

Capacity Stacker automotive companies Incab is from 1.0 to 1.5 m, height – from 1.6 to 3.4 m, some models – up to 4.2 m. Fork-lift trucks powered by batteries 12/24 voltage, and at the request of the customer they are fitted with a built-in or external charger. The minimum width of passage for these models is 1.86 ... 2.0 m. This technique is a Moscow-based company « Kravtel ».

Propelled Stackers from Italy and Germany Equally diverse equipment supplied from Germany, in fact there are enterprises the main leaders of the world Market floor vehicles. One of the most common in our country marks the German warehouse conveyor system is the production company PFAFF silberblau. This is not least due to the active happened company « Pallet Trucks », which implements this technique through a developed network of representative offices in other cities, as well as through numerous dealers. PFAFF silberblau produces two series of self-propelled elektroshtabelёrov – EGV ESL and EGV EPH. Four basic models EGV ESL (g/n 1.0 ... 1.2 m in. P. 1.6 ... 3.0 m) is equipped with two built-in car batteries and chargers. A feature of the series EGV ESL is that the central steering wheel on these machines is installed on springs, which gives excellent stacker motor functions and increases resistance. Seven basic models EGV EPH (g/n 1.2 ... 1.6 m in. P. 2.5 ... 3.5 m) equipped with special forklift with improved visibility. Capacity use in their 24-volt traction batteries to 280 A? H, the model can be equipped with platforms for the operator. The central steering wheel and side drive wheels Stacker Series EPH mounted on springs. Capacity Stacker this number reaches 3.0 m, there are additional functions: « initial rise » and « full free lift », counterweight and others. The company produces in addition to basic models with lift heights up to 5.8 meters.

Most recently appeared on the Russian market, the German-led self-propelled stackers another brand – Otto Kurtbach, a technique which also suggested the company « Pallet Trucks ». This series of two models: Faster light-duty – 1.0 ... 1.2 m lifting height of 1.6 ... 3.6 m and models Meister increased weight of 1.05 tonnes; 1.25 and 1.6 m lifting height of 1.6 ... 3.8 m. Meister stackers can be equipped with a platform for the operator (the model with the index P) and sliding fork (model index RA). Maximum speed with load models Faster – 4.6 km/h models Meister – 4.7 km/h.

The above Italian and German models are about the same price category, and with a good balance of price and quality available to a domestic buyer.

The most interesting are the leading manufacturers of design: it is in their technique concentrated the latest achievements in the field of designing industrial trucks.

Models L10 and L12 (capacity of 1.0 and 1.2 m), which publishes sector handling equipment Linde Fordertechnik recognized world leader – Group Linde, can lift loads to a height of 5.466 m and equipped with a function of the free lift mast, and stackers L14 (g/n 1.4 m) and L16 (g/n 1.6 m) can be equipped with a system boost, increasing the speed of lifting . Models L14i and L16i mechanism distinguishes the initial rise in the support wheel console, which enables the transport of loads weighing up to 2.0 tons. The power of the engine, increased to 1.5 kW, increases the speed of the equipment (with load) up to 5 ... 6 km/h. The original electronic control system provides smooth starting stacker away, rapid acceleration and automatic speed and prevents pilling on uphill or downhill after braking the car. The maximum height of lifting – 5.466 m. The cargo handling at the height of 1.5 m speed of the forks is automatically reduced. Models L14AR and L14APi, L16AP L16ARi equipped and hinged area for the driver and guard. In addition to the buttons and automatic shut-off mechanism to stop when the device upright or horizontal position rotary handle design Stacker Linde also provided a transparent plexiglass shield that protects the driver from the possible fall of the load.

In addition to the above, and the most popular stacker, Linde produces L12-50 and L16-50 model carrying capacity 1.2 and 1,6   t with the function of the initial rise, L16AS carrying capacity 1,6   m with advanced consoles, L10/12AC carrying capacity 1,0 and 1,2   m with a counterweight, without support brackets. Exclusive distributor of Linde AG group in Russia and the CIS countries is the company « Liftek Tools » – Russian branch of the Swiss distribution company Liftec.

The group includes Linde German company Still GmbH, which also produces a large series of high quality warehouse equipment. This compact stacker EGV carrying capacity of 1.0 and 1.2 m (lifting height 3.72 m), and 1.4 and 1.6 m (lifting height 5.47 m). Models equipped with a pulse control system MOSFET and mechanical disc brakes. Rotary handle is offset to the left of the driver's side. On the mast of the forklift has a range that allows to accurately determine the height to which the load is raised. Frame hoist – with free view ahead due to the compact and narrow device lifting mechanism. The design uses a patented lowered automatically by shock, which slows down the speed of the frame from a certain height even when fully pressed down button. All models in this series, in contrast to most of the leading manufacturers of analog console fitted with bearings with an initial rise, in principle, possible to transport and a second pallet. For the transport of two pallets (weight, respectively, to 1.0 and 0.6 m) are specially designed new models Still EGD EGD S 16 and 16 (with a folding platform for the driver). EGV S series models are different from those of the stacker series EGV S presence of flip-pad and fencing. In stacker Still, like technology Linde, higher speed and lifting-lowering than the models of the company Otto Kurtbach and PFAFFsilberblau. All equipment is equipped with a combined discharge of the battery meter and the control of working time. In Moscow, the official dealer of Still GmbH is the company « Casey », provides overall coordination activities of the Moscow office of the German company.

The well-known German manufacturer of concern Jungheinrich AG produces: a series of stacker Ameise EJC-10/12/14/16/20 capacity from 1.0 to 2.0 tonnes with lift heights up to 5.35 m (optional equipment offered with legs spread apart, in the same series, there are versions with a function of the initial Lifting – EJS model Z); stackers ERC-12/14/16 load capacity of 1.2 ... 1.6 m with a folding platform for the driver and the guard; stackers EJB 14/16 (carrying capacity 1.4 and 1.6 tonnes) c extended support brackets. In recent years EJS models were thoroughly modernized: increased their power became better design. New modern electronic control system allowed to smoothly change the speed of lifting and lowering the forks. The model also has a number of Jungheinrich stacker EMC 110 and EMC B10 (with extended support brackets) lifting capacity and lifting height of 1.0 to 2.0 m with a narrow lifting device, which frame unconventional form. An interesting model – electric self-propelled trolley stacker Ameise EJD-20 g/n 2.0 tons of low lift height, which can simultaneously capture two pallets and is used for economical bunk load vehicles. All stackers are equipped with this brand impulse control and speed control. The new models of electric stacker series EFX ac, intended for the tripartite handling, designers, Jungheinrich used the AC drive. Models carrying capacity of 1.0 tonnes (EFX ac 100) and 1.25 m (EFX ac 125) relatively inexpensive, compact and maneuverable. The maximum height of 6.8 m of cargo handling.

full version